Amazing Painting Over Wood Paneling Wilmamaxwell You simply:1. clean2. prime3. paintthe tools you’ll need include: tsp cleaner sponge gloves drop cloth painter’s tape angled brush roller, brushes (2) & e. Prep the wood. the first thing you’ll have to do is prep the wood paneling, which we’ll take a closer look at later. you can do this by using wood filler (on amazon) to cover any gaps and make a smooth surface for the paint to go over. you should then sand it down where you filled in the gaps; the surface should feel slightly rough.
Amazing Painting Over Wood Paneling Wilmamaxwell If its that cheap man made junk so common from the 1970's i would rip it out along with the shag carpet that goes with it, man that was nasty stuff. 5. share. [deleted] • 11 yr. ago. step 1: take down wood paneling. step 2: put up dry wall. then paint as normal. 19. Fill and sand the wood. apply wood putty with a putty knife to fill any holes or cracks and allow to dry. if desired, lightly sand all of the paneling, along with trim and moldings, with 150 grit sandpaper. the idea is to take off the sheen and create a lightly gritty surface so the paint will adhere. Step 2: paint the paneling. next, you can start applying the paint to the paneling. again, it's best to start off using a brush and focusing on the trickier areas, like big knots and grooves. you can then switch to a roller to cover up the rest of the paneling. begin with an initial coat, let it dry, and then add a second coat, as needed. How to paint wood paneling. sand and patch holes. clean the walls. apply a shellac based primer. caulk any gaps. apply two coats of paint. painted tongue and groove walls before and after. this post is sponsored by handy paint products and contains affiliate links for your convenience. purchases made through these links may earn me a small.
Comments are closed.