Caroma Dual Flush Maintenance Youtube Caroma model here but the principals are the same. there’s a washer that needs to be put on properly. How to repair a leaking caroma dual flush toilet (by changing the outlet flush valve) got to caromarepair for more information! happy plum.
How To Replace The Seal And Lever On A Quiet Flow Inlet Valve In A See how easy it is to maintain the dual flow valve. Here are some do it yourself tutorial videos on how to maintain your caroma dual flush toilet. replacing older caroma flush valve seals this tutorial shows you how to quickly replace the seal in the older sydney tank. replacing caroma m5 valve seals this tutorial shows you how to quickly replace the seal on the m5 valve… continue reading caroma dual flush general maintenance tutorials. Check the flush mechanism inside the tank if the toilet is not flushing properly. the toilet will not flush if the flush valve chain has gotten detached from either the flush lever or the flush ball. make sure the chain isn’t too slack so the flush ball lifts when the toilet is flushed. dual flush system. adjust the water level in the tank. Replace duo flush onto valve seat and turn on water, check for leaks. 4. removing the duo flush valve from the seat. gently rock the duo flush canister away from the overflow pipe and pull up. 5. removing the activation box (both newer and older versions of the converter) once it has been snapped onto to the tank lever.
Caroma Dual Flush Maintenance Youtube Check the flush mechanism inside the tank if the toilet is not flushing properly. the toilet will not flush if the flush valve chain has gotten detached from either the flush lever or the flush ball. make sure the chain isn’t too slack so the flush ball lifts when the toilet is flushed. dual flush system. adjust the water level in the tank. Replace duo flush onto valve seat and turn on water, check for leaks. 4. removing the duo flush valve from the seat. gently rock the duo flush canister away from the overflow pipe and pull up. 5. removing the activation box (both newer and older versions of the converter) once it has been snapped onto to the tank lever. First step: remove the hinge pin and remove the float. to cut a long story slightly shorter, if your caroma has a small float mechanism tucked away on the right hand side of the cistern and no arm overhanging the flush mechanism, just ignore the float and get stuck into removing the flush mechanism. The first step to beginning the operation is to turn off the water to the cistern by rotating the stopcock fully clockwise. then, to avoid mess, you need to drain the cistern as completely as possible by doing a full flush and holding the button beyond where the valve automatically re seats itself. so far, so good.
Comments are closed.