Diy Portable Watercolor Palette вђ Artofit Discover art inspiration, ideas, styles. Option a) using the plastic palette. make sure the section you chose fits in the altoids tin (the bottom part) using the dremel, cut slightly larger than the area of interest (see picture). once you've cut it down to shape, clean up the edges with the 80 grit sandpaper.
Diy Portable Watercolor Palette вђ Artofit Squeeze enough liquid watercolor into each box to fill it to the top. you can hit the tin lightly on the table surface to help level the paint. keep adding paint until ever spot is filled: let the paint dry thoroughly. it might take a few days depending on the brand of paint. 1. eat all the mints in one sitting (or spread out over several days, whichever tickles your fancy) and rinse the altoids tin box. 2. gather watercolor tubes. arrange and plan colors. 3. carefully fill half pans with paint from the tube. 4. use double sided tape or other adhesive and adhere to bottom of tin. Step 4: the sticky. now we are going to glue these (with the self adhesive on the magnet) to the bottoms of some 1 2 pans. press them on firmly. you may need to cut the magnets to fit, as i did. normal craft scissors should do the trick. Others spray paint the surface white. that’s the solution i went with, but here’s my next valuable tip: don’t just use white spray paint, use spray on appliance enamel, found with the spray paints at hardware or diy stores. it’s perfect — stain resistant, glossy, very white, quick drying, and rust proof. it was miraculous to watch a.
Comments are closed.