Draw On Rotated Reference Plane Creo
![reference plane Or reference Line вђ Quadmeta Use reference Planes As reference plane Or reference Line вђ Quadmeta Use reference Planes As](https://images.squarespace-cdn.com/content/v1/615ba650da84b920cdff1de5/b095a173-5930-43a3-ac4c-9d2bb79a4840/Reference+Plane+2d+button.jpg)
Reference Plane Or Reference Line вђ Quadmeta Use Reference Planes As 1. click model > plane. the datum plane dialog box opens. 2. click the references collector and select an existing datum axis, straight edge, or straight curve. 3. select through from the constraints list in the references collector. 4. There's a simple workaround. if you start to create a datum plane as. described and it comes up as, for example 315 degrees and you want 45. degrees you can get the dimensional display you want by changing the. rotation angle. type in 45 degrees and hit enter. the dimensional.
![Understand Revolve Tool In creo Parametric Mechanical 360 Understand Revolve Tool In creo Parametric Mechanical 360](https://www.mechanical360.net/wp-content/uploads/2021/11/plane-select-sketch-select.jpg.webp)
Understand Revolve Tool In Creo Parametric Mechanical 360 Aug 27, 2010 04:17 am. hi, for creating a angled datum plane you need two reference, first reference can be surface or plane select one of them than hold ctrl and select your second reference and second reference can be line, edge or axis now you can enter angle value. solved: i am new to pro e. Click model > plane. the datum plane dialog box opens. 2. click the references collector, and in the graphics window, select placement references for the new datum plane. to add multiple references, hold down the ctrl key while you select. 3. select the required constraint option from the constraint list in the references collector. Basic 2d drafting in creo in easy steps with some drawings and designs for mechanical engineers and some basics common tutorials for civil engineers alsoyou. Assume the default 3 datum planes from the standard mmns solid.prt template that ships with creo. datum plane order is right, top, front. if you choose "right" datum plane to sketch on, creo will rotate the sketcher so that the datum's normal is pointing toward you, as close to the same orientation as you had.
Comments are closed.