How To Backwash Your Sand Filter Youtube 1turn the pool filter system off. 2attach your pool hose to the backwash port on your sand filter. 3select the “backwash” position on your multiport valve handle. 4turn the pool filter system on and allow it to rush out of the backwash port and through the backwash hose for two minutes or so until the water in the sight glass runs clear. Attach the backwash hose to filter waste port. this is also known as the waste line or backwash port. your backwash hose will have a lot of water flowing out of it, so be sure the end is placed in an appropriate spot. turn your multiport valve to the backwash position. then turn the filter system back on.
How To Backwash A Bestway Sand Filter If there’s pressure built up in your filter or the water’s not flowing well in your pool, it's time to backwash. backwashing is a necessary part of sand filt. How to backwash a pool filter the right way. 4 – set multiport valve to backwash. the setting to backwash sand filter. push the handle down to release the bottom from its current position. twist it to the backwash position, then lower the lever to lock it in place. it doesn’t matter whether you turn the valve clockwise or anticlockwise. Learn how to backwash your sand filter properly with this easy and informative guide. watch the video and get tips from other pool owners.
How To Backwash Your Pool Filter Sand D E Filters Aqua Blue P 4 – set multiport valve to backwash. the setting to backwash sand filter. push the handle down to release the bottom from its current position. twist it to the backwash position, then lower the lever to lock it in place. it doesn’t matter whether you turn the valve clockwise or anticlockwise. Learn how to backwash your sand filter properly with this easy and informative guide. watch the video and get tips from other pool owners. How to backwash your above ground pool. step 1: turn off the pump and set the valve on the filter to the “backwash” position. step 2: turn the pump back on and let it run for a few minutes, or until the water in the sight glass is clear. step 3: turn off the pump and set the valve on the filter to the “rinse” position. With your backwash hose connected, turn off the pump, and move the valve to the “backwash” position. turn on the pump and backwash the filter for 3 5 minutes. turn off the pump, and move the valve back to the “filter” position. open the pump lid, and pour the sand filter cleaner into the pump’s strainer basket.
Comments are closed.