How To Build A Gable Soffit Ladder Overhang Youtube Building a 16" wide gable soffit ladder overhang with 2x6's on my house addition.tip jar: donations can be made here to help me provide everyone more diy vid. Our 8x10 and 10x12 shed plans for the shed built in these videos can be found here: countrylifeprojects shedplan *save 33% on our plans* right n.
Gable End Roof Ladder Explained Youtube Dan cox explains how to construct gable end roof overhang framing.tracer amk1 deep pencil marker with lead:🛒 amzn.to 3arurqmdan's roofing square & a. Deep roof overhangs must tie into existing framing. it will be done with a similar ladder frame, but the system is a little more involved than blocking. it involves notching the outermost rafter to accept 2x4 outlooks. the 3.5 x 1.5 inch notch should be spaced every two feet and placed to land where roof sheets will break. Ladder framing and outrigger framing are the two most common methods. outrigger framing, using outlookers, is recommended for overhangs greater than 12 inches deep. install gable roof overhang framing with correct lumber dimensions using adequate connections. attach fascia board at the edge of the overhang. install roof deck sheathing extended. Step 2: measure from the pencil mark you made down one edge of the gable end and find the 2 ft mark on the tape then make a line ¾ inches behind it on the gable edge. keep going down that edge of the gable end, penciling a line at every 2 ft interval. repeat the same process with the other edge. by making your pencil line ¾ inches behind the.
Comments are closed.