How To Check The Solenoid On A Riding Lawn Mower Hunker Step by step!today i'll be showing you how to test a starter solenoid on a riding lawn mower!follow the steps in this video & you'll be back to cutting grass. Metal in motion explains how to properly and accurately test the starting solenoid on a riding lawn mower. metalinmotionshop to learn how to test lawn.
How To Check The Solenoid On A Riding Lawn Mower Hunker First, i always like to remove the starter battery from the lawn mower and have it on my workbench. this makes testing the solenoid much easier. so, grab a socket wrench and remove the terminals from the lawn mower’s battery. then, remove the support brackets from the battery and lift the battery off of the lawn mower. Hello everyone! in this video i go over how to diagnose, test, and replace a faulty starter solenoid on a riding lawn mower. i used a universal solenoid that. Make sure your lawn mower is in neutral. turn the key to the on position. 3. bypass the starter solenoid using a screwdriver. lay a long screwdriver over the solenoid to touch the two cables to bypass the starter. the two cables you are looking for are the cable from the battery and cable to the starter. To test a lawn mower solenoid with a multimeter, you will need to first disconnect the battery terminals to prevent accidental electrical shock. then, set the multimeter to the “ohms” setting and probe the two large terminals on the solenoid. if the solenoid is good, you should get a reading of 0 1 ohms.
Comments are closed.