How To Clean Your Car Throttle Body How To Work Throttle Body

How To Clean Your Car Throttle Body How To Work Throttle Body 1. park your car outside and locate the throttle body under the hood. first and foremost, you’ll need plenty of space and fresh air to work. once you’re parked in an open outdoor space, open up the hood of your car and look for the aluminum throttle body between the intake manifold and the air cleaner. [1]. How to properly clean a throttle body or throttle plate. in this video i will show you exactly how to clean a throttle body. cleaning the throttle body is an.

Watch This Before Cleaning The Throttle Body How To Clean The If you decide to pull it off, use a socket wrench to remove the bolts securing the throttle body to the intake manifold. keep track of the bolts, gaskets, and any other components for reassembly. 5. clean the throttle body. wearing gloves and safety glasses, spray the throttle body cleaner onto the throttle plate, inside the throttle body, and. Remove the throttle body. start off by removing the air hose. it should be held on with a hose clamp or cage clip. once the hose is off, remove the electrical connector or cable and unscrew the retaining screws attaching it to the intake. if your throttle body has a gasket or o ring, be sure to replace it. clean it up. In fact, you can perform this cleaning without removing the part from the car. simply disconnect the air duct from the throttle body and spray the cleaner into the part. use a small brush or rag to remove stuck debris, and continue spraying cleaner and wiping the inside of the throttle body until it is clean. Spray the throttle body cleaner into the throttle body. use the soft bristled brush to gently scrub the deposits from the throttle assembly. spray the cleaner and wipe with a towel. repeat the.