How To Fix A Broken Charger Port On Your Phone Tablet Or Lapt Step 3. opening the device. if it's the phone charger port that is not working, start by removing the back cover to expose the inner area of your phone, as shown above (with an android device). once you access it, you can use a toothbrush to clean any debris on the charging port. Tighten the screws to secure the new charger port in place. reconnect the cables to the new charger port. place the back cover of your device back in position and secure it with the screws. power on your device and test the new charger port. replacing the charger port requires some technical knowledge and precision.
How To Fix A Broken Charger Port On Your Phone Tablet Or Lapt If you’re charging up your phone with a usb cable connected to a spare usb port on your laptop, for example, try changing both the cable and the port to see if it makes any difference. How to fix a broken charger. Check the outlet. sometimes the problem lies in the outlet, not in the charger itself. first, you should: try using a different outlet. hit the reset button on your outlet, if you have one. reset. Connect the otg adapter: plug one end of the otg adapter into your phone’s charging port and the other end into the charging cable. the otg adapter acts as a bridge between your phone and the charging cable. connect the charging cable: plug the male end of the charging cable into the otg adapter’s usb port.
How To Fix Android Phone Charging Port Not Charging Loose Port Check the outlet. sometimes the problem lies in the outlet, not in the charger itself. first, you should: try using a different outlet. hit the reset button on your outlet, if you have one. reset. Connect the otg adapter: plug one end of the otg adapter into your phone’s charging port and the other end into the charging cable. the otg adapter acts as a bridge between your phone and the charging cable. connect the charging cable: plug the male end of the charging cable into the otg adapter’s usb port. 2. cut your heat shrink tubing to the appropriate size. you'll know the size you need depending on how much of your cable is split or open. make sure it's a little longer than the split since the heat shrinking tube will shrink when heated. 3. hold the tube in place while you use the heat gun to shrink it into place. Don’t fret: here is how to fix a charger that won’t charge. 1. the outlet. if your charger had been working well regardless of being broken, and now it won’t work even after fixing the broken part, the power outlet is probably the issue. check the fuse box for a tripped breaker; if that’s not the case, try using a different outlet.
Comments are closed.