How To Install A Fuel Pressure Regulator Pontiac Grand Am V6 Youtube As an amazon affiliate, i get commissions from purchases made from links in the description of my videos. please help support my channel by using my link to. Replacing the fuel pressure regulator for the second time on a 1999 pontiac grand am se 2.4l. napa part failed in less than a year, trying an acdelco part th.
Pontiac Grand Am Gt Rough Start And Fuel Pressure Regulator I A check of the fuel pressure regulator, as well as the removal and installation process is demonstrated in this video. buy this part here:amazon affiliate l. Connect the vacuum line to the pressure regulator and install the retainer screw. tighten to 76 inch lbs. (8.5 nm). inspect and verify that the retainer and spacer bracket is engaged in the slots in the fuel rail. grasp and pull on the regulator to ensure that it is properly seated. install the upper intake manifold. Step 1. relieve the fuel system pressure. on v 6 and 2.2 liter models, remove the port cap on the end of the fuel rail. place a rag at the end of the rail and press the small port with a small flat head screwdriver to release the pressure. on 2.4 liter models, unplug the electrical connector to the fuel pump near the fuel tank, then try to. Removal procedure. remove the fuel rail assembly. remove the attaching screw (8) from the pressure regulator. remove the pressure regulator assembly (1) from the fuel rail. twist the assembly back and forth while pulling. image (click to make bigger) sponsored links. was this.
Comments are closed.