How To Use A Metered Dose Asthma Inhaler With A Spacer Thumb вђ Health Asthma. learn how to use a metered dose inhaler with a valved holding chamber (spacer). how to use mdi with valved holding chamber (spacer) you will now receive email updates from the american lung association. watch this american lung association video to learn the correct way to use your metered dose (mdi) asthma inhaler with a spacer. The following steps will help you use your inhaler and spacer correctly: remove the cap. check to make sure nothing is in the mouthpiece that could block the medicine from coming out. shake the inhaler to mix the medicine. hold the inhaler upright. prime the inhaler as directed. put the spacer onto the inhaler.
How To Use A Spacer Inhaler вђ Dr Eisner Pediatrician вђ Houston Texas For inhaled asthma medicines to work properly, they need to reach your lungs. by simply attaching a valved holding chamber or spacer to your metered dose inhaler, you can: help the medicine move past your mouth and throat and get deep into your lungs ; avoid problems with spraying and breathing at the same time; avoid breathing the medicine in. Learn how to use a metered dose inhaler with a spacer device to treat your asthma or copd. watch this medical animation video for tips and instructions. Breathe out completely to empty your lungs. place the mouthpiece in your mouth and close your lips around it to form a tight seal. as you start to breathe in, press down firmly on the top of the medicine canister to release one “puf” of medicine. continue to breathe in slowly for 3 to 5 seconds. Breathe out all the way. hold the inhaler in one of these two ways, as your doctor or asthma educator said: use a spacer valved holding chamber (the best way, useful for all patients) by putting the inhaler into the end with the hole and the mouthpiece end in your mouth. if you don't have a spacer, hold inhaler 1 to 2 inches (or two finger.
Premier Care Pediatrics Patient Information How To Use A Metered Dose Breathe out completely to empty your lungs. place the mouthpiece in your mouth and close your lips around it to form a tight seal. as you start to breathe in, press down firmly on the top of the medicine canister to release one “puf” of medicine. continue to breathe in slowly for 3 to 5 seconds. Breathe out all the way. hold the inhaler in one of these two ways, as your doctor or asthma educator said: use a spacer valved holding chamber (the best way, useful for all patients) by putting the inhaler into the end with the hole and the mouthpiece end in your mouth. if you don't have a spacer, hold inhaler 1 to 2 inches (or two finger. To begin, shake the inhaler five or six times. remove the mouthpiece cover and place the spacer over the mouthpiece at the end of the inhaler. put your lips and teeth over the spacer and breathe in slowly. as you do so, squeeze the top of the canister once. keep inhaling even after you finish the squeeze. continue inhaling slowly and deeply. Breathe in slowly and deeply. remove spacer from mouth, close lips and hold breath for at least 5 seconds or as long as comfortable. breathe out gently away from mouthpiece. if more than one dose is needed, repeat all steps. you can leave the metered dose inhaler in the spacer to shake it before the next puff.
Comments are closed.