Nissan Sentra 2008 2013 Changing Cvt Transmission Fluid In this video i am changing the cvt transmission fluid of nissan sentra 6th generation (2008 2013 model). Here is a simple and easy guide to changing your nissan cvt transmission fluid and potentially fix cvt whining and belt slipping. nissan charges over $300 fo.
How To Change Cvt Transmission Fluid And Filters Nissan Sentra Juke Cvt fluid change performed on a 2008 nissan sentra. note, later model year senra's do not have a charging tube (dipstick) and the process is a bit different . As for the cvt fluid, i contacted valvoline and amalie support and they both have the ns 3 specification (check the files i attached). these are the fluids: valvoline cvt full synthetic fluid amalie universal synthetic cvt fluid i am currently changing the fluid on a 2013 nissan sentra with cvt, i'm using the amalie fluid mentioned above. Remove to reveal the transmission fluid inlet port (where fluid comes in from the radiator). step 7. using your pliers, squeeze and slide off the hose clamp holding the tube onto the inlet port. step 8. place the tube you remove into your 1in. diameter clear plastic tube. direct it into your container marked at 1 qt. Use a small screw driver and push the little tab and then pull out dipstick. jack up vehicle and remove cvt drain plug and drain into pan. i then measured how much oil came out and i got 4 quarts and 23 ounces. after cvt oil stops draining, replace gasket and install drain plug. torque drain plug to 25 ft lbs.
Comments are closed.