Testing A Cooling System For Leaks Using A Pressure Tester Youtube In the first instance, pressurising the system will determine if there is a leak or not. the tester comprises a gauge which measures the pressure in the system. if the reading on the gauge doesn’t drop within 10 minutes or so, there's no leak in the circuit, but if the reading falls an external leak can be identified by a fine spray or. A coolant pressure test helps identify any leaks or blockages in the cooling system, which can prevent overheating and engine damage. a coolant pressure test can help identify problems with the radiator, water pump, thermostat, and hoses. a coolant pressure test can help extend the life of the cooling system by detecting and addressing any.
How To Find A Coolant Leak Cooling System Pressure Test Kit Yout Got my first leak on the subaru wrx sti so i figured i'd take this opportunity to show you all how i test for leaks and the tools that i use coolant pressure. Tighten the coolant pressure tester to the adapter or the radiator or coolant reservoir. push down and twist the connector clockwise until you feel it click and it locks in place. check the radiator cap for the system’s psi. check the radiator cap to see how much pressure to apply without going over this number. Engine cooling system leaks are a common concern for the vehicle owner and technician. this video covers the procedure for conducting a cooling system pressu. This is another in my series of 'the basics'. if you run into an overheat issue on your vehicle, and you suspect a leak, this is the best way to find it. put.
Comments are closed.