Understanding Tankless Water Heater Code 11 Our Expert Guide A dirty or contaminated igniter can hinder the ignition process, triggering code 11 on your rheem tankless water heater. carefully remove the igniter and clean it using a soft brush or compressed air. be cautious not to damage the igniter during the cleaning process. once cleaned, reinstall the igniter properly. Rinnai code 11 indicates an ignition issue in tankless water heaters; causes may include problems with gas supply, venting system, or flame rod; thorough inspection and proper maintenance can help resolve and prevent code 11 errors; understanding rinnai code 11.
Understanding Tankless Water Heater Code 11 Our Expert Guide An issue with the water heater’s venting can also lead to a code 11. first, you’ll want to check the unit’s venting for any blockage and clear as necessary. next, you’ll want to be sure the vents are properly installed and that there is ample clearance around each vent. check if there are any leaks throughout the water heater, causing. Skip to content. A lower flow rate can result in inadequate water pressure and reduced temperature, while a higher flow rate can strain the unit and lead to inefficiency. to ensure optimal flow rate, follow these troubleshooting tips: 1. check the water supply. start by inspecting the water supply to your tankless water heater. What is rheem tankless water heater code 11. code 11 means that the ignition system has failed. this can happen when there is insufficient gas supply to the tankless unit or a faulty ignitor coil. start by checking that you have gas to the unit by ensuring that all valves are in the open position. once confirmed, replace the faulty ignitor coil.
Comments are closed.